AK USB-C Dual DAC Cable (PEE51)


$ 149.00

  

USB-C Dual DAC Cable

Small, but Mighty

Full Metal Housing Design Dual-DAC HiFi Audio Chipset Silver-Plated Copper Shielded Cable Small Size, but Powerful Output   The Astell&Kern USB-C Dual DAC CABLE has been designed as an extension of existing Astell&Kern DAP lines. Smartphone manufacturers are removing headphone jacks from their products. Without a headphone jack, how do you listen to music on your smartphone with the headphones and earphones you currently own? As streaming services begin to support high-quality, high-resolution audio, are wireless earphones and headphones able to provide the full audio playback experience? How can you enjoy high-quality music playback or games with dynamic and realistic sound on your computer without an expensive high-end sound card? Our development team set out to create a product that would answer these questions.

 

Dedicated Dual DAC with Hi-Fi, Ultra-High Resolution Sound

The Astell&Kern USB-C Dual DAC Cable features two Cirrus Logic CS43198 MasterHIFI™ DACs which supports native DSD256 and 32bit/384kHz playback.

With the USB-C Dual DAC Cable, you can experience premium, high-resolution audio from your computer or mobile device.

Small but Powerful Output, Astell&Kern’s Signature Sound and Design

Astell&Kern’s expertise in audio circuit design has allowed us to create a complex and highly integrated circuit chip on a small, six-layer PCB the size of 14 x 41 mm.

In order to create a small device, micro resistors and tantalum capacitors, exclusively created for Astell&Kern were used.  These same capacitors, which are used by AK DAPs, optimize the audio circuit to suppress power fluctuations, creating a USB DAC that provides stable operation and superb audio performance.

The dual CS43198 DACs are paired with an independent analog amplifier, designed to provide true audio playback so you can feel the live, warm and clear sound as intended, without distortion. This is possible based on years of Astell&Kern’s expertise in AMP design.

Although it is a small and simple cable type external DAC, it is able to sufficiently drive high impedance headphones with a 2Vrms (Condition No Load) output level.

Plug & Play with Most Devices 

The Astell&Kern USB-C Dual DAC Cable features a USB-C connection, which can be found on the latest Android-based smartphones and Windows and Mac computers. 

Since the USB-C Dual DAC Cable draws power from the playback device it is connected to, there is no need for a separate charger. The USB-C Dual DAC Cable supports any headphone or earphone with a 3.5mm connector.

The USB-C Dual DAC Cable brings the famous signature Astell&Kern sound to your devices for a reasonable price.

*Both earphones and headphones that support 3-pole and 4-pole 3.5mm plugs can be used, but the in-line controller and microphone functions built into 4-pole earphones and headphones are not supported.

Noise-Shield Customized Cable

We developed a custom-made, 4-core cable to express the sound you want to reveal through the cable and enhance durability against disconnection. The cable is reinforced to withstand up to 200N of tensile force using aramid fiber.  

This cable is made by wrapping silver-plated copper wire and the copper wire in a spiral form around a center core made of Technora Aramid fiber to block external noise.

A separate shielding treatment is applied to the cable to block distortion and noise of digital and analog signals from the playback device.

The silver-plated copper wire used in the USB-C Dual DAC Cable is thicker than typical silver-plated copper wire (0.3μm, usually 0.1~0.15µm). The addition of copper wire provides clear and rich spatial sound.

 

Roon Tested

Roon’s fundamental goal is to provide a consistently stellar user experience. This goal doesn’t stop at the software... the experience extends all the way down to the audio playback hardware, regardless of manufacturer.

As a Roon Tested partner, Astell&Kern has provided equipment to Roon for testing with a variety of different operating systems and computers, and shared information about its design and capabilities.

We have a direct relationship with Roon and in many cases, the Roon support team has our devices on hand, so you can confidently choose to use Astell&Kern hardware with Roon.

 

The USB-C Dual DAC Cable uses the design concept of “light and shadow” that is used in all Astell&Kern products. The USB-C Dual DAC Cable design is based on a single centerline that boldly crosses from right to left. The faces were arranged by adjusting the angle ratio so that the sharp faces of the upper four faces meet at one point. It is designed so that each side is reflected according to the movement of light.

To make the grip comfortable for one-handed use, the surface was created to be like a pebble that has been smoothly polished by the natural weathering effect of stone, rather than featuring the sharper angles typically found in existing AK products. This product design provides a nice, smooth feeling when holding the cable in your hand.

The weight of the metal material used reflects the same durability and solid feel compared to other Astell&Kern devices.

 

Precautions When Using the Product

The Astell&Kern USB-C Dual DAC Cable is compatible with most Android-based smartphones and tablet PCs, computers running Windows 10 and macOS. iOS-based devices, such as iPhones and iPads are currently not supported. Some Android devices may require adjusting certain settings to function correctly.

Due to hardware, software, and system limitations of certain supported devices, not all functions may work correctly or be available for use. 

When connected to a Windows PC, the device is automatically recognized and the correct driver will be installed. A separate USB DAC Driver installation may be required for high-quality sound playback and can be downloaded from the Support-Download section of the Astell&Kern global website.

To play DSD and high-quality PCM sound sources on a smartphone, a separate free/paid app that supports high-resolution audio playback must be installed. (When using the smartphone's own built-in player, audio may be down-sampled)

When connecting to a playback device (Android-based smartphone, tablet PC, and PC), be sure to check the volume level before connecting earphones and headphones. Some devices may automatically set the output level to maximum volume when the USB-C Dual DAC Cable is connected. Listening to headphones or earphones at maximum volume may damage your hearing. Please verify the volume level before each use. 

When connecting the USB-C Dual DAC Cable to an Astell&Kern player and using the cable as an external DAC, the output volume will be fixed at the maximum volume setting. It is not possible to adjust the volume through the Astell&Kern player. Listening at maximum or a high-volume setting may cause serious damage to your hearing. Astell&Kern, its affiliates and agencies, cannot be held liable for any damage or injuries from negligent or inappropriate use. We do not recommend using the USB-C Dual DAC Cable with Astell&Kern players.

Firmware updates may be released periodically for stability improvements. For more information on firmware updates and to check if a firmware update is available, please visit the Support-Download section of the Astell&Kern global website.

 

 

AK USB-C Dual DAC Cable Quick Start Guide

 

AK USB-C Dual DAC Cable USB DAC Driver

Driver File: AK USB-C Dual DAC Cable USB DAC Driver

Notes

  1. This is an integrated USB Audio driver for AK Devices. The previous USB DAC driver will need to be deleted from the AK Device prior to installing the new driver. To delete the previous driver, connect the AK Device to the computer and the previous Driver can be located in the "Contents" folder.
  2. This driver is for Windows 7/8/8.1/10 (32/64bit). For MAC OS, the driver is automatically recognized without needing to be manually installed.
  3. Once the driver is installed for Windows PC, the device will be recognized automatically.
  4. To use the AK Device USB Audio as the default device, you may need to change the default output device option in the computer's Settings Menu.
  5. For high quality sound playback on Windows PC, it is recommended to change the default format to "24-bit, 192000Hz" for the AK Device in the Control Panel - Sound menu.
  6. For Native DSD playback, the music playback program must also be capable of Native DSD playback. Depending on the music playback program, you may need to change the audio device to AK Device USB Audio in Settings menu.
  7. For more information on using USB Audio, please refer to the AK Device's product manual.


How to Install the Driver

  1. Click the Download button on this page to download the USB DAC driver for your Windows computer. After running "setup.exe" file, click the [Next >] button.
  2. The installer will display the path of the driver to be installed.
  3. Click the [Install] button in the installer to complete the installation.
  4. When the installation is complete, the AK Device's USB DAC device driver is automatically installed. Click [Next >] → [Finish] button of the installer to complete the installation.
  5. Connect the AK Device in USB DAC mode to listen to music.

 

 

Reviews

Awards